COMFORT FEATURES
Adjustability
Adjustment drawcord at hemAdjustment strap at lower arm
Adjustment tab at cuffs
Adjustment zippers at side seam
Double adjustment strap at waist
Elasticated upper arm
Flexisnap at collar
The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Variable height adjustment straps at waist
Pockets
Inner pocket within thermal linerThe internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Slit pocket on sleeve
Stash pocket on back
Two inner pockets
Two waterproof stash pockets at waist
Waterproof inner pocket within waterproof liner
The internal pocket within the waterproof liner is waterproof.
Lining
3D meshMesh
Features
Cuff zipperThe zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.
External hang loop
Long connection zipper
Prepared for REV’IT! Segur neck brace
Prepared for vest connector NEON
The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
Short connection zipper
Short connection zipper in detachable waterproof liner
Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
Stretch at elbows
Two-way Collar Snap Closure System
CLIMATE REGULATION
Waterproofing
Detachable 3L GORE-TEX liner with a tricot backerThe liner used in this garment is a detachable 3-layer (3L) GORE-TEX liner with a tricot backer. Keep the liner in for 100% waterproofing. For the rides that don't require waterproofing, easily take this liner out and store it away.
Separately wearable GORE-TEX 2-in-1 waterproof liner
This GORE-TEX 2-in-1 liner has been two functions. It protects against the wind and cold when zipped into a garment but can also be worn as a jacket by itself, providing the same functionality, reducing the need for additional layers when riding.
Insulation
Detachable thermal linerVentilation
Ventilation panels on chestThe ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
VCS|Panel with FidLock® magnetic fastener
Removable panels for optimum ventilation. Ventilation is nice on warmer days, but not as desirable in cold weather. The panels can be kept open due to the FidLock magnetic Fastener. The Fidlock® magnetic fastener not only uses the attraction but also the repulsion of magnets. This leads to a robust closure with high locking strength that can still be easily opened with one hand while riding.
XL zippers on sleeves
Zipper at center front
Zippers at back
Protection
Ready for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Protective print at elbows
SEEFLEX CE-level 2 Elbow Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
SEEFLEX CE-level 2 Shoulder Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
Outer shell material
NeopreneNeoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
Parkskin
PWR|Shell 750D
Consisting of 100% high-performance polyamide yarns, PWR|Shell 750D takes the best properties of a nylon with a high melting point, tremendous tear and abrasion-resistance, and excellent durability and then puts the unique REV’IT! design stamp on it. It provides high-performance protection for every rider.
PWR| shell ripstop
Fabric made for durability and abrasion resistance thanks to its special ripstop weaving with interwoven reinforcement threads at regular intervals.
PWR|Shell stretch
Visibility
Laminated reflection on backReflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection at front
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Reflective logo on back
Reflective logo at chest
Reflective logo at upper arms